Inspection mini camera endoscope for inspecting hard-to-reach places. The camera head with a diameter of 5.5 mm has an LED backlight. The brightness is adjusted using a roller on the handle. Also, on the handle there is a button with which you can take photos that are saved in the memory of the connected device. The camera is waterproof according to the IP67 standard - short-term immersion to a depth of up to 1 m. The camera has a USB Type-A connection type (standard computer USB). Can be connected to the Launch X431 diagnostic complex, a Windows computer, or via adapters included in the kit to Android devices. The length of the cruel but flexible probe is 80 cm (it leaves the shape that it was given by hand.

Can be used for:
- inspection of cylinder walls through spark plug holes
- inspection of the condition of other units without disassembling them
- inspection of interior cavities behind decorative panels without dismantling them
- condition catalysts and particulate filters through sensor openings

Includes:
- hook attachment
- magnet attachment
- attachment with a miniature mirror for inspecting surfaces at 90° relative to the camera (before use, you must remove the disposable protective film from the glass)< br />- USB Type-C and Micro USB adapters
- instructions

Technical data:
Len O.D. (mm)  5.5mm
Tube O.D. (mm)  4.8mm
Tube Length  800mm
Cable Length  2m
Sensor Size - 1/9”
Resolution - 1280x720
Operating temperature - 0℃~65℃< br />Power Supply - 5V
USB Port - USB2.0/Type C/Micro USB