Original retrofit kit for LED license plate illumination for BMW E39 E60 E61 E70 E71 E82 E87 E88 E84 E90 E91 E92 E93 F10 F11 F06 F13 F20 F22 F30 F32 F34 F36.
Includes 2 LED license plate lights and 2 new type connectors with pins.
Unlike Chinese counterparts, the license plate is illuminated with a delicate white backlight, without blue tint. The original lampshades have a matte lens that only illuminates the number plate in a directional manner, and not, among other things, the bright road behind the car. They last for several years, unlike Chinese lampshades, whose service life can be only a few weeks. The original lampshades fit neatly into their original places in the body, are guaranteed to be waterproof and do not allow moisture to pass into the body.
For installation, the old lampshades are removed, the wires from the old plugs are cut, the new pins are stripped and crimped. Before installing pins into new plugs, you must check the polarity and correct connection to the new lamps. If the polarity is incorrect, the lamps will not light.
On the left is an LED lamp, on the right is an old one with an incandescent lamp.
On the left is a plug for the LED lamp, on the right is the old type.
After connecting, you must programmatically disable the integrity check of the license plate lamps, otherwise the dashboard will display a message about burnt-out lamps.
This can be done in the Bimmercode program (in English) or Carista (in Russian or English) using the Vgate vLinker BM+ or ELM327 diagnostic adapters.
Or by changing parameters in the NCS Expert program in the LMA/FRM light block
KALTUEBERWACHUNG_KZL_L
nicht_aktiv
KALTUEBERWACHUNG_KZL_R
nicht_aktiv
WARMUEBERWACHUNG_KZL_L
nicht_aktiv
WARMUEBERWACHUNG_KZL_R
nicht_aktiv
FEHLERMELDUNG_CC _KZL_L
nicht_aktiv< br />FEHLERMELDUNG_CC_KZL_R
nicht_aktiv