Professional kit for installing soft ambient interior lighting. Number of colors - 64.

Has a soft, uniform glow, similar to that installed standard from the factory in additional trim levels of premium cars.

Color and brightness are controlled wirelessly via an application on your phone (Android, iPhone) via Bluetooth. A complete shutdown is possible. Also, the application has a light-music mode, when the lighting system reacts to the music being played in the cabin through the smartphone’s microphone.

We do not do installation, this can be done yourself, or in a qualified car service center, for example, specializing in the installation of car alarms, since the principle is identical - disassembling the interior panels and laying wires.

The kit will come with an electronic instruction manual for connection and installation, as well as a link to an application for controlling color and brightness changes from a phone.

The cost of the set is 220 EUR. Product code AMBL.1

An example of the operation of the installed kit on a BMW X6 E71, where this option did not exist from the factory.

The kit is based on LED strips (many bright LEDs). Unlike kits based on light guides, where light sources are installed at the edges, the light in LED strips does not fade further from the light source, but spreads perfectly evenly throughout. In addition, the LED strips from the proposed kit have light diffusers. Other similar options with LEDs arranged in the form of a strip without light diffusers look like garlands, the light from them is not soft, but rather sharp and intrusive, they cannot be compared with factory standard systems.

This kit has 4 independent wireless modules and 1 central control module, which, in turn, is controlled from the phone. The central module synchronizes the operation of the entire system. To operate 4 wireless modules, you only need a 12 V power connection. There is no need to run cables across the entire cabin to the central module. There is no need to pull the control cable through the corrugations with wiring connecting the doors to the body. Constant power in the doors, for example, can be taken from the illumination of the power window buttons, and for the dashboard, use the power to illuminate the hazard warning button.

Included:

- 5 LED strips. 4 pieces 74 cm long (for doors) with a connection on one side, and 1 piece 110 cm long (for the center console - dashboard) with a connection on both sides. The tapes can be cut to the required length on the opposite side of the wire connection for the control source. A 110 cm long ribbon can be cut into 2 unequal parts. The long part is installed on the right side of the dashboard, above the glove compartment. The short part is installed on the left side above the airflow grilles, thereby extending the overall line of the dashboard.
- 4 light sources for illuminating interior door handles
- 4 light sources for illuminating door pockets
- 4 foot lights on single-sided tape, connected by wires to the main control unit
- 1 central Bluetooth module, which controls 4 wireless modules for doors and with the help of which the entire system as a whole is controlled from the phone.A 12-volt power supply is connected to the module, as well as LED strip wires for controlling the dashboard light and 4 footlights - 4 wireless modules for installation in the door. The modules are connected to 12 Volt power. Also, LED strip, handle illumination and pocket illumination are connected to the modules by wires. The illumination of handles and pockets may not be connected, this does not affect the operation of the system.
- Control button for switching colors if control from the phone is not available

.

Before cutting the LED strip to the required length, it is necessary to remove the outer insulation from it and cut it in a place where there are no electronic parts (indicated by an arrow in the photo). If the LED strip is cut at random, the effect of a different color shade from other light sources may appear.