Tire pressure sensors 4 pcs. for BMW F01 F10 F25 (analogue 36106798872)

EAN: BMTPMS.4F10

80.00 EUR

Available

New tire pressure sensors for BMW vehicles equipped with the TPMS (Tire Pressure Monitoring System) with direct monitoring via physical sensors in each wheel — RDC (Reifen Druck Control). This is a high-quality analogue of the original sensors with part number 36106798872, designed to replace faulty or lost original sensors.

The sensors operate at a frequency of 433 MHz, fully meeting the factory requirements for compatible BMW models. The process of pairing the new sensors with the vehicle is greatly simplified: it occurs automatically during a test drive. For successful synchronization, you must drive at a speed of at least 40 km/h for approximately 15–20 minutes. Before starting the process, you should reset the TPMS system via the vehicle's onboard computer menu.
Which BMW vehicles are these tire pressure sensors compatible with?
The sensors are designed for BMW models with the RDC (direct pressure measurement) system, manufactured after March 2014. Such vehicles have a standard pressure monitoring system via physical sensors in the wheels. If the RDC function is available in your vehicle's menu, these sensors are fully compatible.
If your BMW displays the basic RPA (Run Flat Indicator) system instead of RDC — which works via ABS sensors and does not require separate wheel sensors — the RDC function can be activated as an additional option at a specialized service center. After activation and sensor installation, the system will display real-time pressure and temperature information for each wheel.
For BMW vehicles manufactured before March 2014, in addition to installing the sensors themselves, additional equipment (antenna receivers) and software activation of the system may be required. It is recommended to consult a specialist before purchasing.
Compatible BMW Models
BMW 5 GT (F07) (from 03.2014) 2014, 2015, 2016
BMW 5 Series (F10, F11) (from 03.2014) 2014, 2015, 2016
BMW 6 Gran Coupe (F06) (from 03.2014) 2014–2020
BMW 6 Series (F13, F12) (from 03.2014) 2014–2020
BMW 7 Series (F01, F02, F04) (from 03.2014) 2014, 2015
BMW X1 (E84) (from 03.2014) 2014–2016
BMW X3 (F25) (from 04.2014) 2014–2018
BMW X4 (F26) (from 04.2014) 2014–2019
BMW Z4 (E89) (from 03.2014) 2014–2019
Mini Countryman (R60) (from 07.2014) 2014, 2015
Mini Coupe (R58) (from 07.2014) 2014, 2015
Mini Paceman (R61) (from 07.2014) 2014–2016
Mini Roadster (R59) (from 07.2014) 2014, 2015
Rolls-Royce Dawn (2015–2024)
Rolls-Royce Ghost I (from 04.2014) 2014–2020
Rolls-Royce Wraith (from 04.2014) 2014–2024
Analogues and Replacement Part Numbers
These sensors are a complete replacement for the following original and analogue part numbers:
36106798872 (original BMW part number)
36106874830
4069, 550-1917, TX-S004L/R, TPS0004L/R
ECR0010, RDE012V21
9014-4069, 9015-4069, 1210-4069, 2210-4069
1400-4069, 1401-4069, 4040-4069, 4041-4069
590914-4069, 590918-4069
4069PFR, 4069PFM, 4069PVM
4040-RDE012, 4041-RDE012
RDE012PVM, RDE012PFR
What's Included in the Kit?
The kit includes 4 pressure sensors — one for each wheel. All sensors are new, supplied in individual packaging, ready for installation. The appearance and construction fully match the original: metal housing, rubber valve, electronic module with battery.
How is Installation Performed?
Sensor installation requires specialized equipment and should be performed at a tire service center. The process includes:
Tire removal.
Replacement of the standard valve with a new sensor.
Wheel balancing.
Tire mounting.
Resetting the TPMS system via the vehicle menu.
A test drive for automatic sensor pairing.
Note: We do not perform sensor installation or replacement — we only supply the components.
Sensor Advantages
Full compatibility — works with the standard RDC system.
Automatic pairing — no programming with additional equipment required.
High measurement accuracy — pressure and temperature displayed in real time.
Reliability — protected housing, high-quality materials.
Affordable price — the cost of a kit of 4 sensors is significantly lower than the original.
If you have questions about compatibility or installation — contact our consultants via the contact form or by phone.

Tracked delivery in Latvia and across Europe.
24 month warranty on this product.

New tire pressure sensors for BMW vehicles equipped with the TPMS (Tire Pressure Monitoring System) with direct monitoring via physical sensors in each wheel — RDC (Reifen Druck Control). This is a high-quality analogue of the original sensors with part number 36106798872, designed to replace faulty or lost original sensors.

The sensors operate at a frequency of 433 MHz, fully meeting the factory requirements for compatible BMW models. The process of pairing the new sensors with the vehicle is greatly simplified: it occurs automatically during a test drive. For successful synchronization, you must drive at a speed of at least 40 km/h for approximately 15–20 minutes. Before starting the process, you should reset the TPMS system via the vehicle's onboard computer menu.

Which BMW vehicles are these tire pressure sensors compatible with?

The sensors are designed for BMW models with the RDC (direct pressure measurement) system, manufactured after March 2014. Such vehicles have a standard pressure monitoring system via physical sensors in the wheels. If the RDC function is available in your vehicle's menu, these sensors are fully compatible.

If your BMW displays the basic RPA (Run Flat Indicator) system instead of RDC — which works via ABS sensors and does not require separate wheel sensors — the RDC function can be activated as an additional option at a specialized service center. After activation and sensor installation, the system will display real-time pressure and temperature information for each wheel.

For BMW vehicles manufactured before March 2014, in addition to installing the sensors themselves, additional equipment (antenna receivers) and software activation of the system may be required. It is recommended to consult a specialist before purchasing.

Compatible BMW Models

BMW 5 GT (F07) (from 03.2014) 2014, 2015, 2016
BMW 5 Series (F10, F11) (from 03.2014) 2014, 2015, 2016
BMW 6 Gran Coupe (F06) (from 03.2014) 2014–2020
BMW 6 Series (F13, F12) (from 03.2014) 2014–2020
BMW 7 Series (F01, F02, F04) (from 03.2014) 2014, 2015
BMW X1 (E84) (from 03.2014) 2014–2016
BMW X3 (F25) (from 04.2014) 2014–2018
BMW X4 (F26) (from 04.2014) 2014–2019
BMW Z4 (E89) (from 03.2014) 2014–2019
Mini Countryman (R60) (from 07.2014) 2014, 2015
Mini Coupe (R58) (from 07.2014) 2014, 2015
Mini Paceman (R61) (from 07.2014) 2014–2016
Mini Roadster (R59) (from 07.2014) 2014, 2015
Rolls-Royce Dawn (2015–2024)
Rolls-Royce Ghost I (from 04.2014) 2014–2020
Rolls-Royce Wraith (from 04.2014) 2014–2024

Analogues and Replacement Part Numbers

These sensors are a complete replacement for the following original and analogue part numbers:

36106798872 (original BMW part number)
36106874830
4069, 550-1917, TX-S004L/R, TPS0004L/R
ECR0010, RDE012V21
9014-4069, 9015-4069, 1210-4069, 2210-4069
1400-4069, 1401-4069, 4040-4069, 4041-4069
590914-4069, 590918-4069
4069PFR, 4069PFM, 4069PVM
4040-RDE012, 4041-RDE012
RDE012PVM, RDE012PFR

What's Included in the Kit?

The kit includes 4 pressure sensors — one for each wheel. All sensors are new, supplied in individual packaging, ready for installation. The appearance and construction fully match the original: metal housing, rubber valve, electronic module with battery.

How is Installation Performed?

Sensor installation requires specialized equipment and should be performed at a tire service center. The process includes:

Tire removal.
Replacement of the standard valve with a new sensor.
Wheel balancing.
Tire mounting.
Resetting the TPMS system via the vehicle menu.
A test drive for automatic sensor pairing.

Note: We do not perform sensor installation or replacement — we only supply the components.

Sensor Advantages

Full compatibility — works with the standard RDC system.
Automatic pairing — no programming with additional equipment required.
High measurement accuracy — pressure and temperature displayed in real time.
Reliability — protected housing, high-quality materials.
Affordable price — the cost of a kit of 4 sensors is significantly lower than the original.

If you have questions about compatibility or installation — contact our consultants via the contact form or by phone.

Which BMW models are these tire pressure sensors compatible with?

The sensors are designed for BMWs with the RDC system, produced after March 2014, including models F01, F02, F04 (7 Series), F10, F11 (5 Series), F25 (X3), F26 (X4), F07 (5 GT), F06 (6 Gran Coupe), F12, F13 (6 Series), E84 (X1), E89 (Z4), as well as some Mini and Rolls-Royce models. The full list of compatible models is provided in the product description.

How are the sensors paired with the car?

Pairing occurs automatically during a test drive. You need to drive at a speed of at least 40 km/h for 15–20 minutes, after first resetting the TPMS system via the car's onboard computer menu. No additional programming is required.

Which original BMW part number do these sensors replace?

The sensors are an analog of the original BMW sensor with part number 36106798872, and are also compatible with other factory numbers: 36106874830, 4069, 550-1917, TX-S004L/R, TPS0004L/R, ECR0010, RDE012V21, and others listed in the product description.

What if my BMW has RPA system instead of RDC?

If your car is equipped with the basic RPA (Run Flat Indicator) system, which works via ABS sensors, the RDC (direct pressure measurement) function can be activated as an additional option at a specialized service center. After activation and sensor installation, the system will display real-time pressure and temperature information for each wheel.

What is included in the package?

The package includes 4 new tire pressure sensors — one for each wheel. The sensors come in individual packaging, are ready for installation, and fully match the original in design: metal housing, rubber valve, electronic module with battery.

What is the operating frequency of the sensors?

The sensors operate at 433 MHz, which fully meets factory requirements and ensures compatibility with the standard RDC (TPMS) system on compatible BMW models.

Where and how to install the tire pressure sensors?

Installation requires specialized equipment and should be performed at a tire service center. The process includes tire removal, replacing the standard valve with the new sensor, wheel balancing, tire mounting, resetting the TPMS system in the car's menu, and a test drive for automatic pairing. The online store itself does not perform installation.

What delivery methods are available for this product?

The product is available for pickup in Riga (free) or delivery within Latvia, Lithuania, Estonia, and other European countries via Omniva parcel machines or courier service, as well as by post. Delivery cost depends on the country and method; a detailed price list is provided in the "Delivery" section on the product page.

What payment methods are available for the order?

Payment can be made via internet banking (SEB, LHV, Swedbank, Citadele, Luminor in Latvia, Estonia, Lithuania), credit or debit cards (Visa, Mastercard), Apple Pay, PayPal, or by bank transfer based on an invoice after placing the order.

What are the advantages of these sensors over original ones?

Key advantages: full compatibility with the standard RDC system, automatic pairing without additional programming, high accuracy of pressure and temperature measurement, reliable construction, and a significantly more affordable price compared to original BMW sensors.