Audi A7 2012-2014 rear dynamic turn signals

45.00 EUR

Available

Dynamic Turn Signals (Sequential Turn Indicators) for Audi A7 (4G) 2012-2014 model years – a modern rear lighting tuning solution that adds individuality and a high-tech look to your vehicle.

The modules are designed to convert the standard rear turn signal into a dynamic one, with a "running light" or "sequential turn signal" effect. When activated, the LED segments illuminate not all at once, but sequentially, from the center of the car towards the edge, which looks stylish and significantly increases safety by attracting more attention from other road users.
Key Features and Benefits:
Direct Compatibility (Plug and Play): Modules are specifically designed for the Audi A7 (4G) of the specified model years. They install between the stock rear light and its original plug, with no need to cut or modify the vehicle's factory wiring. This guarantees warranty preservation and eliminates electrical issues.
No Error Codes: The device fully emulates the operation of stock bulbs. After installation, no computer diagnostics, coding, or programming of the onboard computer (e.g., via VAG-COM/VCDS) is required. No error codes (such as "open circuit" or "bulb failure") appear on the instrument panel or in the self-diagnosis system.
Adjustable Animation Speed: Each module features an adjustment potentiometer, allowing you to customize the speed of the "running light" to your preference. Adjustment scale from 0 to 9:
Setting «0»: The module disables the dynamic effect. Indicators work in normal mode, like stock ones – lighting up and turning off entirely. This is useful for passing technical inspection or personal preference.
Settings 1 through 9: Allow you to smoothly increase the sequential LED illumination speed from slow and smooth to fast and abrupt.
Quality and Reliability: Modules are made using quality components, protected against moisture, vibration, and temperature fluctuations, ensuring long service life in harsh operating conditions.
Installation Process:
Installation is performed from inside the vehicle's cabin, minimizing the risk of body damage. To access the connection point, carefully remove the trunk trim in the area of the rear lights.
Light Removal: Unscrew several mounting nuts/bolts securing the rear light and carefully extract it from the body.
Module Connection: Disconnect the original plug from the light socket. Insert the plug into the corresponding socket on our module, and connect the module's socket to the light. Thus, the module becomes an "intermediate layer" between the vehicle's stock wiring and the light.
Placement and Reassembly: Carefully place the module in the cavity behind the light so it doesn't interfere or rattle. Reinstall the light and secure it. Repeat the procedure for the second light.
Speed Adjustment: After connection and functionality check, you can adjust the desired animation speed using a thin screwdriver through the access hole without fully removing the light.
Total installation time for an experienced user is about 30-60 minutes for both lights.
Technical Specifications and Compatibility:
Vehicle Model: Audi A7 (body type 4G).
Model Years: 2012, 2013, 2014.
Connection Type: Plug and Play (solderless).
Supply Voltage: 12V (matches onboard network).
Adjustment: Dynamic effect speed (potentiometer).
Effect: Sequential (dynamic) illumination of turn signal LEDs.
To visually understand the installation principle, which is similar for many BMW and Audi models, we recommend watching the video tutorial. The video below shows the installation process of dynamic repeaters on a BMW F30, which generally mirrors the steps for an Audi A7:
Why Choose These Dynamic Turn Signals for Audi A7?
Safety: The dynamic signal is better perceived by the human eye, making your maneuver more predictable for drivers behind and to the side.
Style and Exclusivity: Turns a standard feature into a premium tuning element, characteristic of the latest Audi models.
Simplicity and Reversibility: Installation requires no special soldering or programming skills. You can revert everything to factory condition at any time.
Reliability: The modules operate only with the turn signal circuit and do not interfere with other vehicle systems (brake lights, tail lights, reverse lights).
Update the look of your Audi A7 (2012-2014) with these dynamic turn signals – a simple, elegant, and high-tech solution for rear lighting tuning!

Tracked delivery in Latvia and across Europe.
24 month warranty on this product.

Dynamic Turn Signals (Sequential Turn Indicators) for Audi A7 (4G) 2012-2014 model years – a modern rear lighting tuning solution that adds individuality and a high-tech look to your vehicle.

The modules are designed to convert the standard rear turn signal into a dynamic one, with a "running light" or "sequential turn signal" effect. When activated, the LED segments illuminate not all at once, but sequentially, from the center of the car towards the edge, which looks stylish and significantly increases safety by attracting more attention from other road users.

Key Features and Benefits:

Direct Compatibility (Plug and Play): Modules are specifically designed for the Audi A7 (4G) of the specified model years. They install between the stock rear light and its original plug, with no need to cut or modify the vehicle's factory wiring. This guarantees warranty preservation and eliminates electrical issues.
No Error Codes: The device fully emulates the operation of stock bulbs. After installation, no computer diagnostics, coding, or programming of the onboard computer (e.g., via VAG-COM/VCDS) is required. No error codes (such as "open circuit" or "bulb failure") appear on the instrument panel or in the self-diagnosis system.
Adjustable Animation Speed: Each module features an adjustment potentiometer, allowing you to customize the speed of the "running light" to your preference. Adjustment scale from 0 to 9:
- Setting «0»: The module disables the dynamic effect. Indicators work in normal mode, like stock ones – lighting up and turning off entirely. This is useful for passing technical inspection or personal preference.
- Settings 1 through 9: Allow you to smoothly increase the sequential LED illumination speed from slow and smooth to fast and abrupt.
Quality and Reliability: Modules are made using quality components, protected against moisture, vibration, and temperature fluctuations, ensuring long service life in harsh operating conditions.

Installation Process:

Installation is performed from inside the vehicle's cabin, minimizing the risk of body damage. To access the connection point, carefully remove the trunk trim in the area of the rear lights.

Light Removal: Unscrew several mounting nuts/bolts securing the rear light and carefully extract it from the body.
Module Connection: Disconnect the original plug from the light socket. Insert the plug into the corresponding socket on our module, and connect the module's socket to the light. Thus, the module becomes an "intermediate layer" between the vehicle's stock wiring and the light.
Placement and Reassembly: Carefully place the module in the cavity behind the light so it doesn't interfere or rattle. Reinstall the light and secure it. Repeat the procedure for the second light.
Speed Adjustment: After connection and functionality check, you can adjust the desired animation speed using a thin screwdriver through the access hole without fully removing the light.

Total installation time for an experienced user is about 30-60 minutes for both lights.

Technical Specifications and Compatibility:

Vehicle Model: Audi A7 (body type 4G).
Model Years: 2012, 2013, 2014.
Connection Type: Plug and Play (solderless).
Supply Voltage: 12V (matches onboard network).
Adjustment: Dynamic effect speed (potentiometer).
Effect: Sequential (dynamic) illumination of turn signal LEDs.

To visually understand the installation principle, which is similar for many BMW and Audi models, we recommend watching the video tutorial. The video below shows the installation process of dynamic repeaters on a BMW F30, which generally mirrors the steps for an Audi A7:

Why Choose These Dynamic Turn Signals for Audi A7?

Safety: The dynamic signal is better perceived by the human eye, making your maneuver more predictable for drivers behind and to the side.
Style and Exclusivity: Turns a standard feature into a premium tuning element, characteristic of the latest Audi models.
Simplicity and Reversibility: Installation requires no special soldering or programming skills. You can revert everything to factory condition at any time.
Reliability: The modules operate only with the turn signal circuit and do not interfere with other vehicle systems (brake lights, tail lights, reverse lights).

Update the look of your Audi A7 (2012-2014) with these dynamic turn signals – a simple, elegant, and high-tech solution for rear lighting tuning!

What are dynamic turn signals for Audi A7 2012-2014?

These are special modules that convert the standard rear turn signals of the Audi A7 (4G) into dynamic sequential turn signals with a 'running light' effect, where LEDs light up sequentially from the center to the edge, enhancing both style and safety.

Are the modules compatible with the factory wiring of the Audi A7?

Yes, the modules are fully Plug and Play compatible. They install between the original taillight and its connector without cutting or modifying the wiring, ensuring no electrical risks and preserving the vehicle's warranty.

Do any errors appear on the dashboard after installation?

No, the modules emulate the operation of standard bulbs, so no coding via VAG-COM/VCDS is required, and no errors such as 'circuit break' or 'bulb failure' appear on the dashboard or in the self-diagnosis system.

Can the speed of the dynamic effect be adjusted?

Yes, each module features a potentiometer to adjust the animation speed from 0 to 9. Setting '0' disables the dynamic effect, while settings 1–9 allow smooth adjustment from slow to fast.

How are the dynamic turn signals installed on the Audi A7?

Installation is done from inside the vehicle. After removing the trunk lining, the taillight is detached, the original connector is plugged into the module, and the module is connected to the taillight. The taillight is then reinstalled, and the module is placed in the cavity behind it.

How long does it take to install the modules?

For an experienced user, installation of both taillights takes about 30–60 minutes, including removal, connection, and speed adjustment.

What are the benefits of dynamic turn signals?

Dynamic signals improve safety through better visual recognition, give the car a modern and premium look, are easy to install without programming, and are reversible—you can restore the standard operation at any time.

Which Audi A7 model years are compatible with the modules?

The modules are designed for the Audi A7 (body type 4G) from 2012, 2013, and 2014. They operate on the 12V onboard network and do not interfere with other taillight functions (brake lights, parking lights).

What delivery options are available for these modules?

Delivery is available across Latvia, Lithuania, Estonia, and Europe via Omniva parcel machines (from 3 EUR), Omniva courier service (from 8 EUR), and postal delivery to European countries (from 7 EUR). Free pickup is also available in Riga.

What payment methods are accepted for orders?

You can pay via internet banking (SEB, LHV, Swedbank, Citadele, Luminor), credit/debit cards, Apple Pay, PayPal, or by bank transfer based on an invoice after placing the order.